Re: 730 JD shifter

Posted by fixerupper on October 25, 2006 at 20:15:38 from (206.72.37.149):

In Reply to: 730 JD shifter posted by RK Larson on October 25, 2006 at 18:05:28:

Get a service manual for it and the manual will tell you how to adjust the shifters side to side. The locking cap screw could have backed out of the end of a shifting rail so that it isn't held against the adjusting screw anymore so the rail can move side to side a little. The interlock ( I call it the 'flipper') could be broken off of the little rod it is welded to but when that happens the tranny usually goes into a false neutral that you can't get out of without lifting the cover and puting things back by hand. Good luck Jim

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]