Re: OT rewiring a house

Posted by huntingreen on October 22, 2006 at 19:49:04 from (71.87.162.79):

In Reply to: OT rewiring a house posted by msb on October 22, 2006 at 18:55:08:

Wire as much as you can from underneth. Take the existing boxes out and replace them with non metallic old work boxes. If you angle the drill just right you may be able to drill the holes from underneath. Use 14-2 with ground for all but the required 20 amp circuits. (check local codes) You may heve to cut a few small holes in the sheetrock but those can be fixed and will make the job go a lot better. It will take time but is worth the effort.

Replies:

• Re: OT rewiring a house in-too-deep 19:54:41 10/22/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]