Re: Screw for points

Posted by Maark on October 21, 2006 at 15:00:45 from (206.72.3.207):

In Reply to: Screw for points posted by Brian630 on October 21, 2006 at 13:34:49:

Remove the dist. cap and make notice where the rotor is pointing. Then use a black marker and make a mark on the dist. base and the block. When installing the dist. align the marks along with the original rotor position, you should be okay on timing.

Replies:

• Re: Screw for points Brian630 15:25:49 10/21/06 (1)
  • Re: Screw for points MarkB_MI 04:09:08 10/22/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]