Glow Plug Problem 1979 IH 384 / BD154 Diesel

Posted by Ted Van Ryn on October 18, 2006 at 14:51:32 from (192.28.2.40):

I had the engine rebuilt but now have a problem witht he glow plugs. I have burnt out two resistors that mount on the dash. I have hooked up the glow plugs witht he wires attached outside the engine and they work properly, but once installed in the engine they short out causing the resisor to burn out on the dash. I am wondering if the pre combustion sleeves could be out of position just enough to short out the glow plugs. Has anyone run into this before or have any suggesitons. Thanks Ted

Replies:

• Re: Glow Plug Problem 1979 IH 384 / BD154 Diesel bob farrell 05:06:11 10/19/06 (0)
• Re: Glow Plug Problem 1979 IH 384 / BD154 Diesel geok 20:12:45 10/18/06 (0)
• Insulators on wrong? jdemaris 20:04:12 10/18/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]