Re: Farm Truck

Posted by MeAnthony on October 05, 2006 at 04:26:24 from (205.188.117.14):

In Reply to: Farm Truck posted by MikeNY on October 04, 2006 at 20:58:43:

Can you, temporary-like, run a hot wire to the coil + terminal? That should bypass the ignition switch portion of the circuit. I should say that will bypass the 'run' position of the ignition switch. You'll still have to turn the key all the way for cranking power. Unless the ignition switch is bad/dead completely. Then you have to jumper the starter solenoid. I know it works well on the older Chrysler vehicles for diagnostic purposes, but I'm no pro with these Jap ones.

Good luck,
Anthony

Replies:

• Re: Farm Truck Bryan in Iowa 06:28:59 10/05/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]