Hard to get out of gear

Posted by williamf on September 20, 2006 at 10:37:56 from (69.19.14.29):

I asked this first over on the Ford Board, but no one seems to have any ideas. Thought I'd try a wider panel.
I've got a Ford 3500D TLB, manual transmission, two forward, two reverse and Hi-Lo Range.
Sometimes when I get to the end of a hard push with the front end loader it's hard to get the shifter to pull the transmission out of gear, as if the gears are in a bind. Usually if I lift the loader and move forward a little and roll back it takes the strain off. If I force it out without moving first the machine will roll a little as if the gears had been holding it back. This has been going on for a good while, and I'm not sure that it's not gradually happening more often. Any ideas?
Thanks, Wm

Replies:

• Re: Hard to get out of gear alg 12:13:42 09/20/06 (1)
  • Re: Hard to get out of gear williamf 14:09:31 09/20/06 (0)
• Re: Hard to get out of gear RustyFarmall 10:46:23 09/20/06 (1)
  • Re: Hard to get out of gear willaimf 11:27:25 09/20/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]