Re: John deere A-governor/carb?

Posted by RAB on September 17, 2006 at 12:56:57 from (195.93.21.42):

In Reply to: John deere A-governor/carb? posted by Matt Nelson on September 17, 2006 at 11:40:41:

Don"t know a lot about JDs but the governor seems to be your problem as you say it does get to max rpm but slowly.
Try the carburetor without any governor connection, as the governor is the speed control, and see if manually opening and closing the throttle plate gives sensible rpm change (don"t overspeed the engine).
If the engine speed is easily contolled that way, check for sticking in the connection from the governor. It may be trouble in the governor, or adjustment of how quickly the governor reacts to changes in the engine speed, or how far the governor actually opens the throtle plate.
Hope this helps to isolate the problem.
Regards, RAB

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]