|
Tractor Talk Discussion Board |
Late model Perkins Question. Any Perkins gurus?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by lightningale on September 07, 2006 at 16:03:20 from (71.10.224.216):
I recently aquired a Scat Trak with a bad motor. It has a replacement late model(2003) 400 series 2.2 liter Perkins. Apparently, this motor was run out of oil. This particular motor does not use standard main bearing caps to secure the crank in the block, but rather has "bearing carriers" that clamp around the journals of the crank and then it is installed into the block in similar fashion to a camshaft. Of all of the Internet parts sources, I seem not to see anything listed on this motor. question 1) are just the carriers available as a kit with bearings? Question 2) the crank appears to be able to be saved by turning journals(minor scoring and little wear)DO they turn these cranks? question 3) (The obvious one) if a complete crank kit is availalbe who can send me a name of a source? THANKS PEOPLE, Nightningale!
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|