Re: ford 600 tractor

Posted by john in la on August 20, 2006 at 16:07:02 from (72.150.56.150):

In Reply to: ford 600 tractor posted by daisy on August 20, 2006 at 07:59:41:

While on first thought it seams like a good idea; you may want to think this threw a bit.

The PTO shifter; shaft; and the drive line are in the hyd compartment. They need to be lubed.

If you take the pump off you will also expose a hole in the side of the block where oil will leak out.

Now if you were inclined to do so I guess you could remove the pump and make a block off plate for the engine; and hyd lines. Then you could fill both the hyd compartment and trans with hyd oil and just let it level out between the two.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]