|
Tractor Talk Discussion Board |
wrench pullers help on a 1486 IH
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Gene Z on August 13, 2006 at 09:34:13 from (142.165.119.169):
Hello JUst throwing a call for help to all you IH wrench pullers. Neighbour brought a tractor over and said a shell had turned. No oil pressure and it made a squawking noise when it ran. well we pulled the pan there was no fillings in the bottom and not even one shell turned and the crank was in good shape. pulled the oil pump off and it had a few scraches but nothing that wouldn't still pump oil. Well we put new berings in and a rebuilt oil pump (since we had it apart)and started it. It has oil pressure but still Squawks like crasy The noise sounds like a shaft vibrating in a real loose hole. Here is what we have determined is not the problem. NOt the alternator bearing. not the turbo. not the starter staying engaged. we have not pulled the top end apart yet. Could it be a cam bearing? Could it be the TA making the noise in the Tranny ? is there a throwout bearing on the cluch that could be making the noise. Motor does not sound loose at all. So have any of you had any experience with a problem like this?
Thanks in advance!!
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
Latest Ad:
1938 John Deere LI
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
