Starter switch rod and Magneto gnd. rod for 47 WC

Posted by Chuck and Mike on August 05, 2006 at 16:10:56 from (209.98.66.15):

We have a 1947 WC Allis Chalmers that we are restoring. We replaced the starter with a new starter that requires the original linkage and rod that extends to the foot petal (the old starter had a solenoid). Does anyone know where we could get these parts (including the spring)?

We also need the original magneto ground control rod, but we are not sure how it attaches to the magneto. The magneto is a Fairbanks Morse J4B3.

Any help with locating these parts would be greatly appreciated.

Replies:

• Magneto Switch Pics Glen in TX 12:53:30 08/06/06 (0)
• Starter switch rod Pic Nebraska Cowman 17:29:26 08/05/06 (0)
• Re: Starter switch rod and Magneto gnd. rod for 47 Nebraska Cowman 17:06:23 08/05/06 (0)
• Re: Starter switch rod and Magneto gnd. rod for 47 old 16:43:18 08/05/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]