|
Tractor Talk Discussion Board |
Re: Which tractor to buy? 4020?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by NcNE on July 25, 2006 at 21:59:01 from (71.38.64.150):
In Reply to: Which tractor to buy? 4020? posted by Lidya on July 25, 2006 at 20:25:36:
Lidya I 4020 is a very good tractor and still remains popular, however they still hover in value around the $7-10,000 range which is obviously way more than you want to spend. As some of the others have stated, it is a rather big tractor for 15 acres of hay and such. A smaller tractor would probably be more than enough to use as a haying tractor. An Allis Chalmers WD45 or the D-series (D14,15,etc.)would be adequate. Olivers can also be had for a reasonable price, I just browsed the photo ads and there were a few decent sized tractors, 1650,1800 and similar for somewhere close to $3000. A farmall 300,400,along with the 50 series or the 460, 560 would be a good haying tractor too. I noticed a few 806s in your price range. The 806 farmall was one of the 4020's biggest competitors. In any case you will want to look for a tractor with live hydraulics and pto. 3 point hitch would also be a great thing to have due to the many implements you can equip your tractor with such as rear blades, bale movers and etc. Good luck in your quest and if you have any other questions post on the board as there are many knowlegable people in this and the other forums that would be glad to help.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|