|
Tractor Talk Discussion Board |
MF1105 head gasket leaking
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by KYfarm on July 10, 2006 at 06:16:34 from (205.188.117.14):
I have what appears to be a small leak from the head gasket on the Perkins 354 on my MF1105. There is oil and just some small tiny bubbles visible at the front corner of the head just behind and to the left of the injection pump. How big of a problem is this? I realize if it got real bad then it would have to be repaired, but if it stays as a small leak can I just live with the oil leaking down the side of the block. Am I also loosing compression in one cylinder due to this or all the cylinders? Any idea of the cost if I were to pay somebody to do this or is the replacement of the head gasket something that somebody who hasn"t ever done it before but is consistently performing mechanical tasks for the first time with decent results could do? Any help would be appreciated.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
History of the Field Marshall Tractor - by Anthony West. Any restorer who has some knowledge of turn of the century farm machinery, will recognize the name Lanz Bulldog!! This machine was to say the least unusual in its appearance. The huge flywheel and coffee percolator shaped exhaust. Along with square body lines and cylinder head protruding forward of the front axle. Would become the visual differentiation that people would quote to separate the Lanz from other period machines. The Marshall company based at the Briannia Works in Gainsborough
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|