Re: farmall m timing question

Posted by RAB on July 05, 2006 at 06:37:56 from (195.93.21.42):

In Reply to: farmall m timing question posted by glennster on July 05, 2006 at 05:31:21:

Could it have a flywheel with timing mark at TDC (for a mag with inertia trip)? Question is: where is timing mark with respect to piston position. If it is TDC, then the timing may be wrong for a distributor and you should measure back the distance for the timing advance which the distributor might require.
Regards, RAB

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]