Re: Slow hydraulics on Ford 641D

Posted by Hal/WA on June 13, 2006 at 11:26:59 from (66.45.175.118):

In Reply to: Re: Slow hydraulics on Ford 641D posted by Richard H. on June 13, 2006 at 07:13:08:

What do you think of my idea of the pistons sticking in the pushed position, causing them not to flow any pressurized oil? Would this be caused by broken or worn out return springs or just crud in the piston bores?

Also, what would the stick welder be needed for? I have one, but can't imagine what it would be used for with the hydraulic pump.

Unfortunately, my system does not feature a filter. I also suspected an intake leak, because of the foaming, but I thought it would leak oil out the same hole when the tractor is not running, which does not seem to be happening.

Thanks everyone for your help!

Replies:

• Re: Slow hydraulics on Ford 641D Richard H. 12:36:03 06/13/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]