Re: 2010 Carb

Posted by msb on June 11, 2006 at 20:46:38 from (74.133.28.248):

In Reply to: 2010 Carb posted by jimjo2 on June 11, 2006 at 19:25:21:

Its possible the load speed jet(at the front and bottom of the carb) is set too rich and the plugs are fouling or loading up.With the engine running at operating temperature and at fast idle slowly screw the jet in until it begins to lose rpm.Then slowly turn it out until it starts to lose rpm.This drop in speed will be less noticable than the first adjustment. Then split the difference.Do this a couple of times to fine tune the adjustment.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]