Re: Heat shielding/braiding on a fuel line

Posted by RustyFarmall on June 07, 2006 at 08:06:12 from (207.32.13.247):

In Reply to: Heat shielding/braiding on a fuel line posted by 1 Dollar on June 07, 2006 at 07:47:39:

I would think that most auto parts stores would carry rubber line in assorted sizes that is rated for fuel. If not you might try a shop that services small engine lawn and garden stuff. A Snapper lawn mower that I own equipped with an 8 horse Briggs engine, uses a rubber fuel hose with a steel sleeve over it in the area where it goes around the exhaust, so you might try finding a length of steel brake line tubing with an inside diameter sufficient to allow the rubber line to pass through, and then gently bend and shape the whole thing to fit your application.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]