Re: gas sending unit

Posted by skipper on May 29, 2006 at 05:04:22 from (71.101.63.36):

In Reply to: Re: gas sending unit posted by joe moore on May 28, 2006 at 17:43:19:

joe, If you ground out the wire at the sending unit the gauge should peg out. If it does this then the problem is in the sending unit, not the wire which would be very possible. Especially since you said it worked once in your hands and not later. There are woven wires inside those things similiar to a rheostat if you are familiar with those, and they go bad or unwind after a while. BE CAREFUL TO NOT GET SPARK ANYWHERE AROUND WHERE THERE COULD BE FUMES.
skipper

Replies:

• Re: gas sending unit joe moore 13:44:14 05/29/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]