Tractor Talk Discussion Board |
Re: pistons
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Ken L on May 20, 2006 at 05:35:37 from (72.1.18.49):
In Reply to: pistons posted by jd jd on May 19, 2006 at 17:48:39:
Many years ago when I was still in high school, (35 years ago) I bought an 18-28 Oliver Hart-Parr. When I pulled it apart, all the pistons had one crack in them from the bottom of the skirt going up towards the pin. They were between 1 inch to 11/2 inch long. An old time mechanic told me to drill a small hole in the end of the crack and then braze the hole and the crack, file it smooth and put it back together. For a few years, that tractor got used a lot. Now just a few times a year. I have not had a problem yet but, one of these years, I'm going to take it apart just to check if there are anymore cracks.
Replies:
Home
| Forums
Today's Featured Article -
The Tractor Parade: Story of a Case SC - by Bernie DeLon. On a early fall morning back in 1994, I opened the newspaper and happened to spy an article about a local antique tractor club having their annual show that weekend.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|