|
Tractor Talk Discussion Board |
Re: Polaris Sportsman 400
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by BobinKY on May 02, 2006 at 04:44:45 from (68.217.163.74):
In Reply to: Polaris Sportsman 400 posted by Allan in Indy on April 29, 2006 at 19:14:03:
Hey Allen. I have a 2002 Polaris 400. The linkage rod from the shifter handle to the tranny will get out of adjustment and cause the problem that you have described. It adjusts like a screendoor adjuster with a simple wrench. Look on the right side of the machine and you should see the rod. I do not remember taking any plastic off to get to it. The machine is almost impossible to get into gear when we have the choke set up so that it will idle high. Make sure your RPM's are at idle speed with the choke off before you try to get it into gear. Hope this helps. Do you have a service manual?!?
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|