Re: Amsoil?

Posted by dej(JED) on April 26, 2006 at 06:01:33 from (66.212.151.134):

In Reply to: Amsoil? posted by Mike in Ind. on April 25, 2006 at 15:24:43:

Whereas I run an oil testing lab, I found the testing data interesting. ICP results on metals
are not really repeatable at less than 20ppm, so I find that data skewed. The latest version of the test is 5185-02 and the reproducibility numbers don't agree at all. Also + or - 32 degrees F on a flash point is ridiculus. I wouldn't put a lot of faith in that testing data report, but it sure looks pretty doesn't it? My guess is that it's a Tribology lab report and you get what you pay for as they say. You can make numbers do whatever you want. I was just wondering what kind of a Quality Control the lab uses for their testing. We calibrate with API and Nist standards. You will notice there is no mention of quality control. You are to just blindly believe.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]