Re: 9n hydr.?

Posted by mjbrown on April 14, 2006 at 05:34:26 from (132.236.155.209):

In Reply to: 9n hydr.? posted by KPmass on April 13, 2006 at 18:11:45:

I ran a splitter on a 9n that way. Front mounted pump
and a tank made from a big piece of pipe and an open
center control valve. The valve needs to be on the
tractor side of the disconnects so you can run the tractor
with out the wood splitter. If the pump can't circulate oil
it will stop the engine. I ran a rod from the valve handle
(mounted by the seat) through an eyebolt mounted on
the back of the fender back to where it was convinient
to use by the splitter. I just bent a right angle on the end
of the rod for grabbing.
Splitting wood was about the only thing that tractor did
well.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]