Re: 6.5 GM Diesel

Posted by Bob on April 12, 2006 at 15:54:12 from (64.21.249.40):

In Reply to: 6.5 GM Diesel posted by bm3501466 on April 12, 2006 at 15:20:22:

Why do you want to remove it... if it is giving problems, just replace it with a new unit mounted remotely on it's own heat sink.

If you are determined to remove it, a fellow posted over on the Diesel Page that he made his own tool pressing a cutoff torx bit into a scrap of metal, and retaining it with a sreel clip.

You could make a neater one by brazing the bit into a strip of steel.

I'll bet that would be a TIRING project, though, turning those screws about 1/6 of a turn at a time!

Here's a link to the photo of the guy's tool:

• Tool

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]