Re: 50 PSI Oil Sending Unit

Posted by Bob on March 04, 2006 at 12:50:25 from (64.21.249.40):

In Reply to: 50 PSI Oil Sending Unit posted by TimWafer on March 04, 2006 at 12:43:58:

9N or 8N Fords had mechanical gauges. If it matches a Ford tractor, it would have to be a later (numbered-series) tractor.

Standard Ignition and other generic ignition parts companies would probably have a sender.

You need to know at least two things...

The pressure range, and who made the actual guage.

Is it a single gauge, or is it in a cluster?

Is there a mfg's name in small print on the gauge face?

If a single gauge, it would be easy to replace the gauge with a matching gauge and sender.

Post back with any info from the gauge, and I'll try to research it a bit for you.

Replies:

• Re: 50 PSI Oil Sending Unit TImWafer 16:41:09 03/05/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]