Re: Here's one for welders and metallurgists !

Posted by Billy NY on February 24, 2006 at 11:50:18 from (152.163.100.74):

In Reply to: Re: Here's one for welders and metallurgists ! posted by B. Abseck on February 24, 2006 at 10:12:07:

Gotcha, makes sense, just to clarify, it appears as if the frame was cut and the pieces added in between to make the lenghth they wanted, so there are 4 main vertical welds, that have held up with no problems, it's the bottom flange where the trouble is just starting to show, and the reason I am thinking of reinforcing it more substantially to avoid stressing the area. I think photos are in order, if the post gets too far along before I can post photos, I'll do another as an update, hopefully with photos, and try to keep it brief, I highly value the advice, as this truck has to pay for itself...... or I will have to fire myself LOL ! thanks again !

Replies:

• Re: Here's one for welders and metallurgists ! jimNCal 20:52:55 02/24/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]