Re: Here's one for welders and metallurgists !

Posted by Jim in N M on February 24, 2006 at 08:56:51 from (216.31.3.247):

In Reply to: Here's one for welders and metallurgists ! posted by Billy NY on February 24, 2006 at 08:35:45:

Billy, I've done this before and the best way I could find was to place a plate of steel(same thickness as the original frame) over the length of the frame (outside)from the cab to the spring perch's and only weld on the horizantal,than I did a bridge under the bottom flange. I never had a problem with any of these,after years of heavy useage. This might not be what others would do but it worked for me! HTH. Jim in N M

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]