Re: Converting trip loader to fully hydraulic?

Posted by Frank (N.Mi.) on February 13, 2006 at 16:16:30 from (64.179.121.187):

In Reply to: Converting trip loader to fully hydraulic? posted by Nathan in Texas on February 13, 2006 at 15:06:21:

I did the one on my 8n. It took around $750 and at least 30 hrs spent on weekends. What the guys said. You (or someone) will be welding quite a bit. I bought cylinders and hoses/fittings from Northern Tool. I had to put two cylinders on my bucket because of my loader configuration. I do have down pressure, it is nice but it is by no means an excavator and it is not meant to be. My cylinders and some of the hoses were leaking so I decided that was reason enough to modernize :) I am very happy with the results

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]