Re: Belarus 825 shift problem

Posted by barnrat on February 12, 2006 at 06:08:07 from (12.31.20.185):

In Reply to: Belarus 825 shift problem posted by Harlan Petty on February 12, 2006 at 05:24:30:

Yes. There are access covers in the floor that you can take out. I think that tractor has the newer style shifter, I think it had some problems. You can swap it out with the older style shifter. If you can't put it into gear, just stays in neutral. It's most likely a missing or bent pin. If you can put the shifter into gear and nothing happens thats a completly different problem. I take it that you have tried changing ranges on both the floor lever and the Hi-Lo within the gear shift lever. Sometimes these may stick inbetween and cause the problem your describing. 825's had straight cut gear transmissions no helical cut or sycronizers. So they shift clucky and have a greater chance of getting jambed or locked up.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]