Re: Help any mechanical engineers in the group..

Posted by WaltMo on February 07, 2006 at 12:32:13 from (70.243.154.103):

In Reply to: Help any mechanical engineers in the group.. posted by BobReeves on February 07, 2006 at 10:12:16:

Can you lengthen the lever your cylinder is pinned to. This should give less rotation of the pipe. The farther you get from the axis of the pipe the less rotation you will get.
Don"t know many degrees you need to rotate or what length of arms the pads are attached to but if the lever you attach cylinder to is the same length as the four levers your pads are mounted to you should get the same 4 inches as you cylinder. hth WaltMo

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]