Re: Help any mechanical engineers in the group..

Posted by No ME on February 07, 2006 at 11:58:36 from (4.252.98.11):

In Reply to: Help any mechanical engineers in the group.. posted by BobReeves on February 07, 2006 at 10:12:16:

I'm not a M.E. but an A.E.(Agricultural Engineer) by schooling. A simple comparison would be a cheap auto floor jack. The piston moves horizontally only a few inches but the lifting arm moves about about 12-14 inches, all by levers. You would have "ratio" the dimensions of the jack to get a rough idea of how long to make your lever(s). Then, determine the load weight and design accordingly.

Replies:

• Good thinking. Old Pokey 17:08:56 02/07/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]