Re: Loading a dead tractor

Posted by Keith-OR on April 04, 2006 at 09:08:17 from (207.200.116.14):

In Reply to: Loading a dead tractor posted by Engineer20 on April 04, 2006 at 07:17:40:

Should work, before I mounted winch on my trailers, used this method. I have outriggers on my trailers to stop the back from dropping and raising my truck off the ground as I pull tractor up the ramps. I once forgot to block rear of my trailer and lifted the back of my Ford F350 rear tires completely off the ground.

1. Block up the back your trailer
2. Use some sort of blocks in front of trailer tires, to keep trailer from moving forward.
3. Snatch block make things much easier(as Old said)
4. I like using chain or cable rather than tow strap. I do not like the stretch action when loading onto a trailer. Like a more positive pull.

Just becarefull and SAFE!!!!

Keith & Shawn

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]