Re: Got any tricks to rebuilding Hyd cylinders???

Posted by Mongol on January 15, 2006 at 14:45:55 from (67.137.39.77):

In Reply to: Got any tricks to rebuilding Hyd cylinders??? posted by old on January 15, 2006 at 13:43:58:

This is how I do it on case stuff.

Get a med grit emery flap wheel that goes on a 1/4" drill.

Before inserting rod through gland, dress (lightly bevel and debur) the end of the rod with the flap wheel.

Then before stuffing the piston in the tube, run the flap wheel around in the end of the tube to polish and remove any burrs.

If it's all dirty, and anyways, spray with wd40 or light solvent while burnishing, or deburring.

Then there has still been time where it took nearly a ram home with a tractor to get the thing started going back together.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]