Re: needed cutting edge for dirt scoop

Posted by Don-Wi on January 03, 2006 at 16:04:58 from (64.12.117.7):

In Reply to: Re: needed cutting edge for dirt scoop posted by 4020 on January 02, 2006 at 20:46:25:

Any shop would be able to drill or punch holes in a new edge if you want them to, you would justr need the dimensions between the holes and how far in. Every few years a foundry we do work for has us make about 10 new cutting edges for their payloader, we've got a drill jig that we clamp it onto so all the holes are located in the exact same spot without having to layout each peice.
For just a few holes, I can'[t imaging it taking them more than 1/2 hr.
Donovan from Wisconsin

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]