Re: Farmall 560 making a terrible screeching noise

Posted by IH DOC on December 06, 2005 at 17:36:12 from (207.190.77.188):

In Reply to: Farmall 560 making a terrible screeching noise posted by noahsark on December 04, 2005 at 08:02:20:

I can tell ya what ya got there, the splines in the preasure plate that drives your pto & hyd. have worn out & when you put a load on them they are slipping & making a squealing noise. Yes you will have to split the tractor at the clutch housing & I would change the clutch, preasure plate , pto shaft which come out from the front of the ta housing & the pilot & through out brg., also the seal in the housing that holds that pto shaft. I would recomend having the flywheel refaced to while your in there too.
Good luck with your project

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]