Re: FEL hydraulic layout simplification questions

Posted by big jt on December 04, 2005 at 06:41:17 from (206.72.54.246):

In Reply to: FEL hydraulic layout simplification questions posted by Cormac on December 04, 2005 at 04:54:28:

I am not specifically familiar with your loader.

Westendorf has a similiar setup. It is needed because when unhooking the loader you need control of the cylinders so the hoses need to reach as you back away.

Sounds like you are using good sense. Would for sure suggest that you keep the separate valve (controller) I have never been able to use the tractor remote valves very well to feather as well as a separate loader dedicated valve.

hope this answer isn't to muddy

jt

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]