Re: Help! Need to rework logging slash piles

Posted by RodinNS on November 25, 2005 at 19:01:04 from (142.177.83.177):

In Reply to: Help! Need to rework logging slash piles posted by Richard Scott on November 25, 2005 at 15:04:30:

Mud is generally the limiting factor in burning brush piles. Some operators are good at piling, and some aren't.
When I'm setting a pile on fire, I start near some smaller material, use diesel oil to get it going good, plus I like to use a few old tires...... then fire the waste oil to it once it's hot enough..... Either petreoleum or vegetable based oil. I know the tires and oil are taboo in most places...... but they work. Then, if you have a good tight clean pile, that should get it going. If it's dirty, then all the oil in arabia won't make it burn. If worst comes to worst, then get the hoe back in and break the piles up, start a small fire, and then feed the piles to the fire. BT/DT.

Rod

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]