Re: JD 4430 starter

Posted by msb on November 24, 2005 at 16:50:17 from (12.210.167.23):

In Reply to: JD 4430 starter posted by Craig Wooten on November 24, 2005 at 11:39:13:

What I used for many years before I finally broke down and bought the starter wrench was a 12" extension and a 9/16"-3/8" drive- 12 point socket stuck on the extension only part way .Not so far that the ball in the extension engaged the socket.Wobble end extensions work fairly well too.

The contacts in the solenoid have probably welded together so the solenoid will need replaced,but I would also check to see that the starter drive gear is free on the starter shaft.Its the little copper contact that engages the drive gear before the main contacts start the starter turning.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]