Re: Bobcat 600 oil pressure

Posted by Jon Hagen on November 16, 2005 at 06:43:34 from (69.26.17.131):

In Reply to: Re: Bobcat 600 oil pressure posted by doogdoog on November 15, 2005 at 20:07:22:

I am not that familiar with the Bobcat skid loader,but if it is anything like my case SL,the guage reads hydraulic filter restriction. The filter is on the inlet side of the hyd pump,and the guage connected between the filter and pump tells when restriction is too high and the filter should be replaced. The correct guage should be marked in inches of Vacuum. The wisconsin engines rarely have an oil pressure guage,they are splash oiled with the oil pump suppling oil to the splash nozzles at only a few psi.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]