Re: Distributor Help

Posted by Glen in TX on September 28, 2005 at 12:19:15 from (65.249.225.207):

In Reply to: Re: Distributor Help posted by Nelson2 on September 28, 2005 at 05:32:45:

Nelson, The other distributors will probably work maybe better? You may want more advance than the dist. for welder had. Any Pertronix dealer will have the electronic ignition kits for it and they can get the new Pertronix distributors for the Continentals in welders also. The dist. was changed up some on later Lincoln welders to a different number also IBT-4705. I have mags too but you will probably spend more or as much on a mag as the electronic ignition would cost. Some of those older Continentals also used a inverted upside down mount mag to clear the carburetor and those cost even more to fix and some parts aren't available. A new surplus military mag is available for them though. Good luck with it. Glen

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]