Re: Farmall A dimensions

Posted by Paul in Mich on August 28, 2005 at 13:57:21 from (205.188.117.6):

In Reply to: Farmall A dimensions posted by Vic Bunn on August 28, 2005 at 13:22:28:

Vic, Much would depend on how far out the rear wheels are set. If they are set at 48, 56 or 60 inches center to center, you can transport on a regular open bottom 2 rail car hauler. If you are considering a closed trailer, such as a U-haul, you would need to remove the wheel weights regardless of the rear wheel width. From rear of the drawbar (not including swinging drawbar) to front edge of front wheels is approximately 106", or 8"10". Width including wheel dishes sans wheel weights is 57 3/4". 9.5x24 rear tires set at 48" center to center will be 58 inches outside to outside, including bolts, meaning the dishes protrude further out than the tires, but if placed wider, the tires will be wider than the dishes. You can gauge accordingly. Hope this will give you an idea.

Follow Ups:

• Re: Farmall A dimensions Vic from Washington 20:07:55 09/03/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]