Farmall A clutch

Posted by Harold Spofford on August 25, 2005 at 15:36:26 from (201.135.100.244):

I installed a new clutch plate, pressure plate and bearing. It still does the same thing. Whenever I push in the clutch about 3/4 of the way down, it grinds and bounces hard back on the pedal. The gear box seems OK because if it is in neutral I can start the engine and it runs great. I can also put it in any gear and push in the starter and it will move. I can push in the clutch in without the engine running and it seems to be OK. I can see the bearing push in the pressure plate arms. What can the problem be?

Follow Ups:

• Re: Farmall A clutch ben brown 15:57:15 08/25/05 (1)
  • Re: Farmall A clutch Harold Spofford 10:14:39 08/26/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]