Re: Ford 445D specs ?

Posted by Rod F. on August 13, 2005 at 07:00:28 from (142.177.87.198):

In Reply to: Ford 445D specs ? posted by TomWNC on August 11, 2005 at 23:04:19:

I'm not really sure of the spec's on that model. I know that the 445 was an industrial variant of the 4000-4600 series tractor. That should make it 52 hp, at the PTO, or roughly 60 at the flywheel.
I would guess that with a loader, it will tip the scale around 10000 #'s. That's just a rough guess. They've got fairly heavy loader frames, heavy front axles, and quite a bit of plating around the cowl. Underneath, it's basically a stripped down 4600. You might check NH's website. There may still be specs on there for the 445D. HTH.

Rod

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]