Re: JDNH baler differences in production/output

Posted by buickanddeere on July 24, 2005 at 15:15:55 from (192.75.48.150):

In Reply to: JDNH baler differences in production/output posted by Loren on July 23, 2005 at 23:04:30:

While I am a Deere fan. No baler will work if it isn't properly setup. The plunger knife has to be sharp and clearance to the ledger set perfect.
The bale chamber feeding system is to be timed and stroke set for the type of hay.
The knotter has to be clean,sharp,adjusted and timed.
Even the tractor driving the baler matters. Is the windrow being fed into the pickup center, either side or is the tractor tire trampling the windrow. Is the windrow tall/narrow or low/wide?

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]