Tractor Talk Discussion Board |
Re: OT: Biodiesel
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by T_Bone on July 18, 2005 at 01:00:35 from (4.240.132.140):
In Reply to: OT: Biodiesel posted by Tyler from Utah on July 17, 2005 at 17:18:38:
Hi Tyler, Do a google search for rapeseed oil and read a couple Universtiy studies on using SVO (straight vegetable oil) at more than 25%SVO/75%#2D will cause injector and top piston ring plugging on long term usage. B100 is SVO with the glycerin removed. B100 takes longer to plug the top rings but all the long term studies I've read, B100 can't not be used long term on most engines, however B50, 50%B100/50%#2D can be used for long term use without any side effects. The reports all indicated about 500hrs of run time before tests showed the severe plugging problems. This doesn't hold true as the guys on the VW TDI forums are getting more than 500hrs using B100 without any problems. However, I have read reports form guys using 100%SVO with ring plugging problems at about 1000hrs. B100 has less BTU/gal than #2D so power will be slightly lower as well as fuel mileage. The problem I have with B100 is it tracks the price of dino fuel. Why should it? The cost of SVO did not raise nor did the trucking cost raise nor did the cost of producing B100 raise nor did the grain price raise. Why? Because they can! And that burns me. T_Bone
Follow Ups:
Home
| Forums
Today's Featured Article -
Measuring with Calipers - by Staff. The legs of inside calipers are curved outward at the extremities to facilitate measuring small holes, while outside caliper legs have a large curve inward to increase their capacity for large work. Firm-joint calipers are adjusted approximately by the hands and then set to the feel of the work by tapping them on a metal surface. It is a common practice when opening calipers by this means to tap the top of the joint. It is better, if possible, to tap the inside of the legs, as repeated blo
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|