Re: Why does it make noise?

Posted by john in la on July 16, 2005 at 07:19:57 from (67.35.235.109):

In Reply to: Re: Why does it make noise? posted by txgrn on July 16, 2005 at 06:09:56:

Now Now Mark.
Think about what he said. When you push it down 1/4" the noise STOPS.
A throw out bearing would not make any noise at rest and then when you pushed down 1/4" and made contact the bearing would start spinning and START making a noise.

Sounds more like loose pressure plate fingers or springs to me. When you push down the bearing makes contact with the fingers and stops them from rattling.
Either way tractor needs to be split so you can change the clutch out.

Now if you had said the noise stops when you push way down on the clutch I would then think trans input shaft bearing.

Follow Ups:

• Re: Why does it make noise? txgrn 13:42:00 07/16/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]