Re: International 4366 questions

Posted by Jon Hagen on July 06, 2005 at 21:30:01 from (69.26.16.199):

In Reply to: International 4366 questions posted by jkloepping on July 06, 2005 at 18:48:17:

The 4366 is Really a Steiger tractor built in the Steiger plant in Fargo ND with a mix of IH and Steiger parts. The single large disc brake on the front axle driveshaft is the only brake used or needed. The little 466 IH engine was seriously overworked in that size tractor.The axles,which were modified IH 2 wd tractor axles also had problems in that application. Still not a bad old tractor if you do not overload it.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]