Re: Coarse vs Fine Thread ?

Posted by Davis In SC on July 03, 2005 at 19:52:55 from (205.188.117.66):

In Reply to: Coarse vs Fine Thread ? posted by Got a Question for you ! on July 03, 2005 at 19:37:34:

In Theory, the fine thread is stronger than the coarse.. But fine threads are much more sensitive to wide manufacturing tolerances..... A few thousandths oversize on the hole size is less critical , if hole is to be tapped with a coarse thread. Also, we have almost standardized on fractional sizes being coarse... 1/4-20, 5/16-18. 3/8-16, etc. Smaller sizes such as #10 are still found in fine & coarse......

Follow Ups:

• Re: Coarse vs Fine Thread ? Steve Crum 05:18:06 07/04/05 (1)
  • Re: Coarse vs Fine Thread ? Joe(TX) 09:30:36 07/05/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]