Re: Hydrostatic Power Steering

Posted by ChadS on June 27, 2005 at 16:17:47 from (66.228.96.174):

In Reply to: Re: Hydrostatic Power Steering posted by Derek Broerse on June 27, 2005 at 07:31:29:

Yeah, you could orface the pressure line at the steering cyl, This slows down the flow and makes it operate slower. make sure the pressure line is in good shape, cause it will have alot of back pressure, but should be ok. You might be able to use a small flat washer, that can fit inside the fitting, or, reduce the size of the connector down to a smaller size. reduce it by at least half the line size, I run 1/2 hyd hose, and since I have a ford power steering pump, I cut a little off the pressure relief spring in the pump, which dropped line pressure and tuned it in to where it feels like stock. Chad

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]