Re: Farmall H with no compression

Posted by frankiee on June 17, 2005 at 14:24:13 from (69.198.194.170):

In Reply to: Farmall H with no compression posted by Cory A. on June 17, 2005 at 13:22:52:

Compression check
1]Operating temperature
2]All plugs out
3]Coil wire out
4]Throttle wide open
5] Crank 5 times over
6] Observe how fast the gauge goes up within first 2 revs
Helps to have a helper'
Make sure battery voltage up right up
What are the rest of the readings?
Are there any signs of compression going by the head gasket?
While you have the head off then invest in some "crack detector" from the parts store.
Comes in 3 parts. Washer then the penatrant then the developer. It will show cracks that are not visible to the naked eye.
Are you sure your compression gauge is working?
Sorry, had to ask. Some problems are where we dont look.

Follow Ups:

• Re: Farmall H with no compression Cory A. 15:28:13 06/17/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]