Re: Reclaiming hyraulic and or transmission oils

Posted by dej(JED) on June 07, 2005 at 09:52:10 from (66.212.143.210):

In Reply to: Reclaiming hyraulic and or transmission oils posted by Ol Chief on June 06, 2005 at 19:57:27:

Hello... I run a testing lab . We test fuels and lubes daily. There are a lot of people who clean their oil with a variety of equipment. The centrifudge is used primarily in the steel mills. There are several things that need to be replaced in used oils and you will need to know how much and what to add. This testing is called tribology or predictive and preventative maintance. Good luck, but between setup cost, testing, additives and hazardous waste disposal, you are going to have your hands full. There is a company called Safety Clean who does exactly what you are thinking about. As a matter of fact I think they are still recovering from a Chapter 11 scenario.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]